| Step(s) | Possible(s) Cause(s) | Resolution |
| 1 | The most frequent cause of this problem relates to the order of the cables and the device startup sequence | Check that the cables have been connected in the correct order and that each cable is correctly plugged into the related connector. If this does not fix the problem, move on to the next step. |
| 2 | The problem occurs when devices have been started with all of the cables connected between them. | Check that the phone and glasses were started separately. Then connect the cables on the glasses and dedicated device side. If this does not fix the problem, move on to the next step. |
| 3 | This problem occurs when one of the cables has a defect. | If you have any other OTG cables or USB-to-micro USB cables, test them separately. If this does not fix the problem, move on to the next step. |
| 4 | Sometimes, glasses or external cameras may not be detected when standalone mode is enabled. | To work around this problem, perform the following steps: - Turn off all devices - Disconnect all cables - Turn on the phone only - On the phone, log in to XpertEye - Connect the glasses or cameras - The preview screen should be displayed If this does not fix the problem, move on to the next step. |
| 5 | The Quick Start guides supplied with the solution may help you to fix this problem. Click here to download them. If the guide for your glasses is not shown, use the Contact page on the Support site to let us know. | If this is unsuccessful, contact AMA Customer Support. This topic explains the appropriate procedure. |
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article